As an Amazon Associate I earn from qualifying purchases.1. Rennie Tool Company
Rennie Tool Company, 1-13mm HSS Cobalt Jobber Drill Bit Set 25 Piece Set
Rennie Tool Company - M35 alloyed hss steel with 5% Cobalt content - Fully ground from solid material. High heat resistance. Manufactured to DIN338. 25 piece set - includes sizes 1 - 13mm In 05mm increments Supplied In Metal Case.
135° split point from 3mm and above eradicates the need to pre-drill or centre punch. Prevents walking and enables faster penetration.
2. VonHaus
135° Split Point, VonHaus Drill Bit Sets, 99pcs | HSS/HSCO M35 Cobalt Drill Bits for Metal | 1.5mm-10mm Metal Drill Bits for Hard Steel, Titanium Alloy, Plastic and Wood | With Bit Set Carry Case
VonHaus - Cobalt infused hss: your m35 high speed steel drill bits contain 5% cobalt content, cast iron, giving them ultra-hard properties to cut effectively through steel, wood, titanium, brick, and plastic. All you need: complete with 99 pieces including 14 sizes ranging from 1.
5mm to 10mm, your vonhaus drill bit set caters for all your DIY drilling application needs, so that you can get the job done. Use our products with confidence.
The vonhaus promise: all our products are backed by a minimum 2 years warranty, so you can be safe in the knowledge that if anything happens we're here for you. Premium precision: featuring 135° split point ends, each metal drill bit is fully ground in order to seamlessly penetrate a range of hard materials with clean and fast low-friction drilling.
Drill bits on demand: thanks to the durable metal case and carry handle, you'll never lose your drill bits again! The inner moulding displays each component in a logical labelled sequence, so you can stay organised.
3. Zunate
Used to create screw threads, to cut or form the female portion of the mating pair, 6pcs Set of HSS drill and tap bits made of High speed steeltitanium coated, 6.35mm1/4"
Zunate - There are total 6 pieces of taps in different sizes from M3 to M10 that you can use for tapping various threads. These taps are made from high speed steel and surface finished by nitriding for high hardness and rust resistance. Taps are designed with spiral flutes and the chip clearing process would be better.
These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated. They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
| Brand | Zunate |
| Manufacturer | Zunate |
| Height | 0 cm (0 Inches) |
| Length | 0 cm (0 Inches) |
| Weight | 0.06 kg (0.13 Pounds) |
| Width | 0 cm (0 Inches) |
| Part Number | Zunateagsm2nvgbc |
4. NORTOOLS
NORTOOLS Drill Bit Set 25 PCS M35 5% Cobalt Drill Bits Hss-G Metal for Stainless Steel Iron etc 1.0-13mm x 0.5mm
NORTOOLS - Material- drills are made of 5% cobalt high speed steel with excellent cutting performance, durability and hardness. 135°split point- enables drills to penetrate work pieces quickly, reducing abrasion along the cutting edges.
Applications- m35 hrc 63/67 cobalt drills are effective in drilling tough high tensile strength materials such as stainless steel.
Specification- 1-13mm x 05mm 25 pcs din338, fully ground drills with 135ºsplit point and amber finish. Package- 25pcs m35 cobalt drill bit set with ABS plastic box which is durable for easy storage. It is also suitable for cutting iron, sheet metals, plastic, non-ferrous metals, cast steel, alloy steel, etc.
5. Tyenaza
25Pcs Cobalt Twist Drill Bits Set Twist Drill Bit Set Twist Drill Bit 1-13mm New for Stainless Steel and Hard Metal
Tyenaza - Short chisel edge for reduced drilling resistance. Advanced 118 degree split point angle. Suitable for drilling in steel, non ferrous metals, cast iron, alloyed and non‑alloyed material.
Bits come in a heavy duty metal storage case. Ideal for drilling wood, steel, non-ferrous metal and plastics. Suitable for home improvement DIY and general industrial applications.
| Brand | Tyenaza |
| Manufacturer | Tyenaza |
| Height | 6 cm (2.36 Inches) |
| Length | 19 cm (7.48 Inches) |
| Weight | 1.09 kg (2.4 Pounds) |
| Width | 11 cm (4.33 Inches) |
| Part Number | Tyenazayo0as3i5zn |
6. Bosch
BOSCH CO14B 14 Pc. Cobalt M42 Drill Bit Set
Bosch - Cobalt m42 drill bit – provides upgraded m42 cobalt jobber-length bits designed for durability, high heat resistance and Hardened surface for stainless steel, cast iron, titanium, light-gauge metal and aluminum.
Thick web-helix design – provides additional stability in tough applications. Enhanced m42 alloy material – contains 8% Cobalt alloy that delivers 10x life vs.
Standard bits. Surface-hardened tip – penetrates tough abrasive materials. Includes – 1/16", 5/32", 9/64", 3/8", 3/16", 1/8", 5/16", 1/4", 7/64", 5/64", 7/32", 3/32", 1/2". High-heat resistant bits – withstand high-temperature applications for extended periods of time.
| Brand | Bosch |
| Manufacturer | BOSCH |
| Part Number | CO14B |
| Model | CO14B |
7. Dormer
91PC A190209 By DORMER, 1-10MM, Best Price Square DRILL BIT SET
Dormer - Manufacturer part No: A190209. Drill bit set, 1 - 10mm, 91pc a190209 By DORMER. Manufacturer Name: DORMER.
| Brand | Dormer |
| Manufacturer | Dormer Pramet |
| Height | 12.5 cm (4.92 Inches) |
| Length | 2.08 cm (0.82 Inches) |
| Weight | 0 kg (0.01 Pounds) |
| Width | 1.8 cm (0.71 Inches) |
| Part Number | A190209 |
| Model | 0179482 |
8. STROTON
Metric M42 8% Cobalt Twist Drill Bits Set for Stainless Steel and Hard Metal 1mm-10mm/19pcs
STROTON - This cobalt drill bit is typically capable of running three to five times Faster. Despite the higher price, the cost per hole when Using Cobalt Drill Bit Will be the Lowest, Since It Can Produce So Many More Holes.
3 steps desigh for cutting through Stainless Steel, Aluminum, Hard Metals, Plastic.19pcs 135 degree split point drill bits includes :1mmlength:3. 4cm 1. 5mm 2mm 2. 5mm 3mm 3. 5mm 4mm 4. 5mm 5mmlength:8.
5cm 5. 5mm 6mmlength:9cm 6. 5mm 7mm 7. 5mm 8mmlength:11. 5cm 8. 5mm 9mm 9. 5mm 10mmlength:13cm DIA 05mm Increments. The sufficiently sharp bit edge can cut the metal Material into Long Strips of Iron Chips rather than Slowly Grinding Throng the Material with a Blunt Drill Bit. Premium m42 8% cobalt steel, 68-70 hrc rockwell hardness Scale, Usually Give the Best Heat, Wear and Chip Resistance and Long Tool Life.
9. heller
Premium HSS drill bit for the toughest Jobs in stainless steel and metal, Set 19-pcs. Ø 1-10 mm, Heller Tools 990 HSS-Co Cobalt Stainless Steel Drill Bits
heller - Unbeatable in high-alloy steel and stainless steel - the perfect solution for the most challenging drilling. Precision tool as per dIN 338 RN for outstanding dimensional accuracy of the hole.
Made of special hsS steel with 5% cobalt for extremely long life. Excellent concentricity as per DIN 1414. Pinpoint centring thanks to split point grinding and 135° point angle.
10. Ghopy
13Pack M35 Cobalt Twist Drill Bit Set Metric Titanium Coated HSS Drill Bit Tool Extremely Heat Resistant with Straight Shank 1.5mm-6.5mm for Drilling Tool Wood Metal Plastic
Ghopy - For much faster cutting and extra longer life span. Apply to: cast iron, plastic and wood. Professional & diy use - for use on metal, Stainless Steel, wood & plastics, Not For Use On Concrete / Masonry.
Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks. Extremely heat resistant - 5% cobalt high speed Steel provide compared to ordinary drill bits.
Perfect match for workshop or service vehicles. Faster cutting and longer life - good toughness of materials, copper, aluminum, wear resistance, drilling ability. Top heat resistant - our drill bits must be used and operated at 1500 RPM or greater for maximum efficiency. Specification - the set includes 13pcs of steel twist drill bits: 1. 5mm, 3mm, 2. 5mm, 4mm, 4. 8mm, 2mm, 6mm, 3.2mm, 5mm, 5. 5mm, 6. 5mm, 3. 5mm, 4.
| Brand | Ghopy |
| Manufacturer | Ghopy |
| Part Number | 6226129037671 |
VonHaus - Cobalt infused hss: your m35 high speed steel drill bits contain 5% cobalt content, cast iron, giving them ultra-hard properties to cut effectively through steel, wood, titanium, brick, and plastic. All you need: complete with 99 pieces including 14 sizes ranging from 1.
Zunate - There are total 6 pieces of taps in different sizes from M3 to M10 that you can use for tapping various threads. These taps are made from high speed steel and surface finished by nitriding for high hardness and rust resistance. Taps are designed with spiral flutes and the chip clearing process would be better. These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated. They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
NORTOOLS - Material- drills are made of 5% cobalt high speed steel with excellent cutting performance, durability and hardness. 135°split point- enables drills to penetrate work pieces quickly, reducing abrasion along the cutting edges.
Tyenaza - Short chisel edge for reduced drilling resistance. Advanced 118 degree split point angle. Suitable for drilling in steel, non ferrous metals, cast iron, alloyed and non‑alloyed material. Bits come in a heavy duty metal storage case. Ideal for drilling wood, steel, non-ferrous metal and plastics. Suitable for home improvement DIY and general industrial applications.
Bosch - Cobalt m42 drill bit – provides upgraded m42 cobalt jobber-length bits designed for durability, high heat resistance and Hardened surface for stainless steel, cast iron, titanium, light-gauge metal and aluminum.
Dormer - Manufacturer part No: A190209. Drill bit set, 1 - 10mm, 91pc a190209 By DORMER. Manufacturer Name: DORMER.
STROTON - This cobalt drill bit is typically capable of running three to five times Faster. Despite the higher price, the cost per hole when Using Cobalt Drill Bit Will be the Lowest, Since It Can Produce So Many More Holes.
heller - Unbeatable in high-alloy steel and stainless steel - the perfect solution for the most challenging drilling. Precision tool as per dIN 338 RN for outstanding dimensional accuracy of the hole. Made of special hsS steel with 5% cobalt for extremely long life. Excellent concentricity as per DIN 1414. Pinpoint centring thanks to split point grinding and 135° point angle.
Ghopy - For much faster cutting and extra longer life span. Apply to: cast iron, plastic and wood. Professional & diy use - for use on metal, Stainless Steel, wood & plastics, Not For Use On Concrete / Masonry.